Szczegóły Produktu:
Zapłata:
|
| Material: | Stainless steel | Quotation leadtime: | within 24 hours |
|---|---|---|---|
| Business Type: | Manufacturer&factory | Tolerance: | +/-0.1mm |
| Cena: | reasonable and negotiate | avaliable files: | stl |
| Material Capabilities: | cobalt-chromium alloy,stainless steel 316,titanium |
High Precision Stainless Steel DMLS 3D Printing With Tolerance 0.1mm
Advantage:
1. Compared with traditional manufacturing techniques, the speed of DMLS is the most
obvious because no special tooling is required and parts can be built in a matter of hours.
2. DMLS allows for more rigorous testing of prototypes. Since DMLS can use most alloys, prototypes can be functional hardware made out of the same material as production components.
3. DMLS is also one of the few additive manufacturing technologies being used in production. Since the
components are built layer by layer, it is possible to design internal features and passages that could not be cast or otherwise machined.
4.Complex geometries and assemblies with multiple components can be simplified to fewer parts with a
more cost effective assembly. DMLS does not require special tooling like castings, so it is convenient for
short production runs.
Application
· Product design, rapid production of high-precision injection molds.
· Metal parts, fire test parts, fixture direct manufacturing and model demonstration test.
· Research and development of implants, teeth, skull repair, prosthetics and medical
equipment.
· Development of new products.
· Creative design and display of culture, creativity, clothing, household goods and other.
|
Technical Specifications for Direct Metal Laser Sintering |
|
Technique Specifications of EOSINT M 280 |
Equipment |
|
|
Building volume |
250 mm x 250 mm x 325 mm (9.85 x 9.85 x 12.8 in) |
|
| building platform | 9.85 x 9.85 x 12.8 in | |
|
Laser type |
Yb-fibre laser, 200 W oder 400 W (optional) |
|
|
Precision optics |
F-theta-lens, high-speed scanner |
|
|
Scan speed |
up to 7.0 m/s (23 ft./sec) |
|
|
Variable focus diameter |
100 - 500 μm (0.004 - 0.02 in) |
|
|
Power supply |
32 A |
|
|
Power consumption |
maximum 8.5 kW / typical 3.2 kW |
|
|
Nitrogen generator |
integrated |
|
|
Compressed air supply |
7,000 hPa; 20 m3/h (102 psi; 706 ft3/h) |
|
|
Argon supply |
4,000 hPa; 100 l/min (58 psi; 3.5 ft3/min)(optional) |
|
Claim Terms:
We produce the products or samples according to your requirements. If our products can not reach your
requirements ,two solutions as follow:
1, we will produce your products again until reaching your reuirments for free.
2, we give the refund and you send us our products by international express.
